高清不卡一区二区三区,国产区日韩精品久久无码,苍井空亚洲无码在线看,亚洲国产综合精品2020

你在找什么？

0.87英寸OLED圖形顯示器，128×32分辨率SSD1316Z IC，15針，4線SPI接口

SCE087001-V01是一個COG型的OLED顯示器，128×32分辨率，SSD1306Z集成電路，4線SPI接口，15針

型號:
SCE087001-V01
Size (inch)尺寸（英寸）:
0.87寸
Resolution:
128×32
Outline Dimension (mm):
29.00x8.7x1.22
Viewing Area (mm):
22.856x6.824
Active Area (mm):
21.356×5.324
Interface:
4-wire SPI
IC Part No.:
SSD1316Z
Color:
Monochrome (White)
PIN:
15
FPC type:
Connector

立即查詢

產(chǎn)品詳細信息

Basic Information

Display Color:               WHITE
Dot Matrix:                    128×32
Drive IC:                        SSD1306Z
Viewing Angle:              160°
Aperture rate:                77%
Interface:                       4 wire serial interface
Outline Dimension: 29.0(W)x8.7(H)x1.22(D)
View area: 22.856 (W) x 6.824(H)
PIN: 15
FPC Type: Connector

General Specification

ITEM	SPECIFICATIONS	UNIT
MODULE SIZE	29.0(W)x8.7(H)x1.22(D)	mm
VIEWING AREA	22.856 (W) x 6.824(H)	mm
ACTIVE AREA	21.356 (W) x5.324(H)	mm
DOT SIZE	0.147(W) x0.147(H)	mm
DOT PITCH	0.167(W) x0.167 (H)	mm
ASSY.TYPE	COG	---
WEIGHT	TBD

Interface Definition

PIN NO.	SYMBOL	TYPE	FUNCTION DESCRIPTIONS
1	C2N		C1P/C1N-Pin for charge pump capacitor. C2P/C2N-Pin for charge pump capacitor. Connect to each other with a capacitor. They must be floated when the Charge pump not use.
2	C2P
3	C1P	O
4	C1N
5	VBAT	P	Power supply for charge pump regulator circuit. It must be connected to external source when charge pump is used. It must be floated when charge pump is not used.
6	VSS	P	Ground pin. It must be connected to external ground.
7	VDD	P	Power pin for logic circuit. It must be connected to external source.
8	CS#	I	Chip Select input pin. Active "L"
9	RES#	I	Hardware reset input pin. Active "L".
10	D/C#	I	This pin is Data/Command control pin. When the pin is pulled HIGH, the data at D[7:0] is data. When the pin is pulled LOW, the data at D[7:0] is command.
11	SCLK	I/O	Serial interface clock wire
12	SDIN	I/O	Serial interface data wire
13	IREF	I	Current reference for brightness adjustment. This is segment output current reference pin. When external IREF is used, A resistor should be connected between this pin and VSS . Set the current at 10 uA maximum.
14	VCOMH	O	COM signal deselected voltage level. A capacitor should be connected between this pin and VSS.
15	VCC	P	Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used. It must be connected to external source when charge pump is not used.