高清不卡一区二区三区,国产区日韩精品久久无码,苍井空亚洲无码在线看,亚洲国产综合精品2020

<tfoot id="7am29"></tfoot>

<ruby id="7am29"></ruby>

你在找什么？

d帶128×32分辨率SSD1316BZ集成電路、15針、4線串行接口的0.91英寸OLED圖形顯示器

SCE091003-V01是一種COG型OLED顯示器，分辨率128×32，SSD1306BZ集成電路，4線串行接口，15針

型號:
SCE091003-V01
Size (inch)尺寸（英寸）:
0.91寸
Resolution:
128×32
Outline Dimension (mm):
30.0×11.50×1.227
Viewing Area (mm):
24.384x7.584
Active Area (mm):
22.384×5.584
Interface:
4-wire SPI
IC Part No.:
SSD1306BZ
Color:
Monochrome (White)
PIN:
15
FPC type:
Soldering

立即查詢

產(chǎn)品詳細信息

Basic Information

Display Color:               WHITE
Dot Matrix:                    128×32
Drive IC:                        SSD1306BZ
Viewing Angle:              160°
Aperture rate:                82.5%
Interface:                       4 wire serial interface
Outline Dimension:        30.0(W)x11.5(H)x1.227(D)
View area:                      24.384 (W) x 7.584(H)
PIN:                                15
FPC Type:                      Soldering

General Specification

ITEM	SPECIFICATIONS	UNIT
MODULE SIZE	30.0(W)x11.5(H)x1.227(D)	mm
VIEWING AREA	24.384 (W) x 7.584(H)	mm
ACTIVE AREA	22.384 (W) x5.584(H)	mm
DOT SIZE	0.159(W) x0.159(H)	mm
DOT PITCH	0.175(W) x0.175 (H)	mm
ASSY.TYPE	COG	---
WEIGHT	TBD

Interface Definition

PIN NO.	SYMBOL	TYPE	FUNCTION DESCRIPTIONS
1	C2P		C1P/C1N-Pin for charge pump capacitor. C2P/C2N-Pin for charge pump capacitor. Connect to each other with a capacitor. They must be floated when the Charge pump not use.
2	C2N
3	C1P	I
4	C1N
			Power supply for charge pump regulator circuit.
5	VBAT	P	Power supply for charge pump regulator circuit. It must be connected to external source when charge pump is used. It must be float when charge pump is not used.
6	VSS	P	Ground pin. It must be connected to external ground.
7	VDD	P	Power pin for logic circuit. It must be connected to external source.
8	CS#	I	Chip Select input pin. Active "L"
9	RES#	I	Hardware reset input pin. Active "L".
10	DC#	I	This is Data/Command control pin. When the pin is pulled HIGH, the data at D[7:0] is data. When the pin is pulled LOW, the data at D[7:0] is command.
11	SCLK	I	4 wire serial interface clock wire
12	SDIN	I	4 wire serial interface data wire
13	IREF	I	Current reference for brightness adjustment. This is segment output current reference pin. A resistor should be connected between this pin and VSS .Set the current at 12.5 uA maximum.
14	VCOMH	O	COM signal deselected voltage level. A capacitor should be connected between this pin and VSS.
15	VCC	P	Power supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used. It must be connected to external source when charge pump is not used.